Editing And Adapting A Simulation Graphic; Enlarging Or Reducing The Graphical Representation - Siemens SINUMERIK 840D sl Operating Manual

Simulating machining

7.8 Editing and adapting a simulation graphic

Procedure
7.8 Editing and adapting a simulation graphic
7.8.1

Enlarging or reducing the graphical representation

Precondition
The simulation or the simultaneous recording is started.
Procedure
...
188
1. Simultaneous recording is started.
2. Press the ">>" softkey.
The tool paths are displayed.
4. Press the "'Delete tool path" softkey.
All tool paths recorded up until now are deleted.
1. Press the <+> and <-> keys if you wish to enlarge or reduce the graphic
display.
The graphic display enlarged or reduced from the center.
- OR -
Press the "Details" and "Zoom +" softkeys if you wish to increase the size
of the segment.
- OR -
Press the "Details" and "Zoom -" softkeys if you wish to decrease the size
of the segment.
- OR -
Press the "Details" and "Auto zoom" softkeys if you wish to automatically
adapt the segment to the size of the window.
The automatic scaling function "Fit to size" takes account of the largest
expansion of the workpiece in the individual axes.
Operating Manual, 05/2017, A5E40869190
Grinding