Editing Network Properties; Displaying The Network Symbol Information Table - Siemens SINUMERIK 840D sl Operating Manual

21.5.8.5

Editing network properties

You can edit the network properties of an INT block.
Network title and network comment
The title can have a maximum of 3 lines and 128 characters. The comment can have a
maximum of 100 lines and 4096 characters.
Procedure
21.5.9

Displaying the network symbol information table

All of the symbolic identifiers used in the selected network are displayed in the "Network
Symbol Information Table" window.
Grinding
Operating Manual, 05/2017, A5E40869190
- OR -
Press the <DEL> key.
The network, including all the logic operations and operands, or the se‐
lected operation is deleted.
1. The ladder diagram display (LAD) is open.
2. Use the cursor keys to select the network that you want to edit.
3. Press the <SELECT> key.
The "Network Title / Comment" window opens and shows the title and a
possibly assigned comment for the selected network.
5. Press the "Change" softkey.
The fields can be edited.
6. Enter the changes and press the "OK" softkey to transfer the data to the
user program.
Edit PLC user program (828D only)
21.5 View of the program blocks
429