Siemens SINUMERIK 840D sl Operating Manual page 29

Grinding
Operating Manual, 05/2017, A5E40869190
<CTRL> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-FlashDrive
is not inserted, then the files are backed-up in the manufacturer's
area of the CF card.
<SHIFT> + <ALT> + <D>
Backs up the log files on the USB-FlashDrive. If a USB-FlashDrive
is not inserted, then the files are backed-up in the manufacturer's
area of the CF card.
<SHIFT> + <ALT> + <T>
Starts "HMI Trace".
<SHIFT> + <ALT> + <T>
Exits "HMI Trace".
<ALT> + <S>
Opens the editor to enter Asian characters.
<ALT> + <Cursor up>
Moves the block start or block end up in the editor.
<ALT> + <Cursor down>
Moves the block start or block end down in the editor.
<DEL>
● Editing box
Deletes the first character to the right of the cursor.
● Navigation
Deletes all characters.
<DEL> + <CTRL>
● Editing box
Deletes the first word to the right of the cursor.
● Navigation
Deletes all characters.
<Spacebar>
● Editing window
Inserts a space.
● Switches between several specified options in selection drop-
down list boxes and in selection boxes.
<Plus>
● Opens a directory which contains the element.
● Increases the size of the graphic view for simulation and traces.
<Minus>
● Closes a directory which contains the element.
● Reduces the size of the graphic view for simulation and traces.
<Equals>
Opens the calculator in the entry fields.
Introduction
2.2 Operator panel fronts
29