Further parameters
If you have set up unique cutting edge numbers, these are displayed in the first column.
Column heading
D no.
SN
Magazine list icons
Icon/
marking
Tool type
Red cross
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green frame
Magazine/location number
Green double arrow
Gray double arrow (con‐
figurable)
Red cross
Procedure
13.8.1
Positioning a magazine
You can position magazine locations directly on the loading point.
Grinding
Operating Manual, 05/2017, A5E40869190
Meaning
Unique cutting edge number
Cutting edge number
1.
Select the "Parameter" operating area.
2.
Press the "Magazine" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the load position.
The magazine location is disabled.
Manage tools
13.8 Magazine
283