Siemens SINUMERIK 840D sl Operating Manual page 64

Operating with gestures
3.3 Finger gestures
Note
Flicking gestures with several fingers
The gestures only function reliably if you hold the fingers sufficiently far apart. Fingers should
be at least 1 cm apart.
64
Pan with one finger
● Move graphic contents (e.g. simulation, mold making view)
● Move list contents
Pan with two fingers
● Turn graphic contents (e.g. simulation, mold making view)
Tapping and holding
● Open object for changing (e.g. NC block)
Tapping with 2 index fingers - only with the 840D sl
● Tap with two fingers simultaneously in the lower right and
left-hand corners to open the TCU menu.
The menu has to be opened for service purposes.
Operating Manual, 05/2017, A5E40869190
Grinding