Activating And Deactivating A Device; Initial Commissioning Of Additional Devices - Siemens SINUMERIK 840D sl Operating Manual

Easy XML
18.2 Easy Extend (828D only)
18.2.3

Activating and deactivating a device

Status
Procedure
18.2.4

Initial commissioning of additional devices

Normally, the device has already been commissioned by the machine manufacturer. If an initial
commissioning has not been performed or if, for example, function tests are to be performed
again (e.g. when retrofitting additional devices), this is possible at any time.
The "Start-up" softkey has been declared as Manufacturer data class (M).
Procedure
394
Meaning
Device activated
System waiting for PLC checkback signal
Device faulty
Interface error in the communication module
1. Easy Extend is opened.
2 You can select the desired device in the list with the <Cursor down> or
<Cursor up> keys.
3. Position the cursor on the device option for which the function has been
unlocked and press the "Activate" softkey.
The device is marked as activated and you can now use it.
4. Select the desired activated device and press the "Deactivate" softkey to
switch the device off again.
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Easy Extend" softkey.
Operating Manual, 05/2017, A5E40869190
Grinding