Removing A Tool From Multitool - Siemens SINUMERIK 840D sl Operating Manual

13.14.4

Removing a tool from multitool

If the multitool has been mechanically re-equipped with new tools, the old tools in the tool list
must be removed from the multitool.
This is done by positioning the cursor on the line on which the tool is located that is to be
removed. When it is unloaded, the tool is automatically saved in the tool list outside the
magazine in the NC memory.
Procedure
Grinding
Operating Manual, 05/2017, A5E40869190
2. Position the cursor on the tool that you want to load into the multi‐
tool.
3. Press the "Load" and "Multitool" softkeys.
The "Load on..." window opens.
4. Select the required multitool and the multitool location into which
you wish to load the tool.
1. The tool list is opened.
2. Position the cursor on the tool that you would like to unload from
the multitool and press the "Unload" softkey.
- OR -
Position the cursor on the tool that you would like to remove from
the multitool and delete and press the "Delete tool" softkey.
Manage tools
13.14 Working with Multitool
297