NEC Univerge SV8100 System Hardware Manual page 81

2.5.3
3-22
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Installing the 19" Controlling Chassis
1. Ensure the chassis is powered down.
Do not remove or install this blade with the power on.
2. Align the CD-CP00 blade with the Slot 1 Guides of the Controlling
Chassis.
Figure 3-25 19"Controlling Chassis – Slot 1 Guides
3. Slide the CD-CP00 blade into the chassis until resistance (back plane)
is felt.
Figure 3-26 Installing the CD-CP00 Blade
4. Gently push until the blade seats. Tighten the two retaining screws on
front of the blade.
http//vietpro.com.vn
UNIVERGE SV8100
Installing the SV8100 Chassis