NEC Univerge SV8100 System Hardware Manual page 38

UNIVERGE SV8100
Table 2-3 Maximum System Capacities – Chassis
chassis and related equipment that can be installed in a system.
Hardware
Number of Slot(s)
Interface Package
Chassis:
CHS2U
(19" Chassis)
Expansion:
PZ-BS10
3-jack Expansion Board for
Controlling Chassis
PZ-BS11
1-jack Expansion Board for
Expansion Chassis
Battery:
CHS LARGE BATT BOX
(External Battery Box)
Fan Box:
CHS2U FAN BOX SET
Power Supply:
MPS7101
Table 2-4 SV8100 Maximum System Capacities – Blades
number for each blade that can be installed in a system.
This is determined by the maximum blade configuration allowed. When installing
single line sets, DISA, or tie lines, CPU circuits must be allocated for DTMF
receivers. To install single line sets with CO/PBX line access, or when installing
immediate-start tie lines, CPU circuits must be allocated for dial tone detection.
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Table 2-3 Maximum System Capacities – Chassis
19"
Chassis Chassis
with without
CPU
for
5 Slots 6 Slots
1 1
1 0
0 1
1 1
1 1
1 1
shows the maximum number of
19"
19"
Chassis
Networked
x4
CPU
23 Slots
4 16x(1+3)
1 16x1
3 16x3
4 16x(1+3)
4 -
4 -
http//vietpro.com.vn
Comments
Chassis
Virtual slot in
NetLink is limited
to maximum of
240
-
-
-
1 is factory
installed with
each chassis
1 is factory
installed with
each chassis
shows the maximum
2-7