NEC Univerge SV8100 System Hardware Manual page 372

UNIVERGE SV8100
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Figure 6-35 Separate Tilt Leg from Leg Support
4. Push the two stopper tabs through the slots to separate the tilt leg
from the leg support.
5. Lay the tilt leg and the leg support flat.
6. Press the two tabs locking the legs to the multiline terminal and pull
the legs toward you, lifting to remove.
Figure 6-36 Remove Legs From Multiline Terminal
7. Disconnect serial connection cord from terminal body. Leave cord
connected to the cradle unit.
http//vietpro.com.vn
6-45