NEC Univerge SV8100 System Hardware Manual page 335

9.
10. Terminate the extension leads to GRN/RED of the modular jack. Terminate the
11. Install bridging clips as required.
For the module to ID correctly, set the circuit type to 0 for the port in Program
10-03-01 prior to connecting the line cord.
12. Plug a modular line cord from the mod jack to the CN1 connector on the
6-8
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Figure 6-7 IP1WW-2PGDAD Connections
Install a modular jack for each IP1WW-2PGDAD. For each module, run
one-pair 24 AWG station cable from the cross-connect block to a modular jack.
Ground the unused pair.
unused leads to the jack.
IP1WW-2PGDAD.
Installing SV8100 Optional Equipment
http//vietpro.com.vn
UNIVERGE SV8100