NEC Univerge SV8100 System Hardware Manual page 106

UNIVERGE SV8100
14. Using two screws, install the Battery Tray Bracket.
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
9. Install batteries into Battery Tray. Refer to
Battery Cables.
Removing Battery Tray Bracket on page 3-46.
Figure 3-64 Connecting Battery Cables
11. Insert Battery Connection Cable into cable guides. Refer to
3-64 Connecting Battery Cables on page 3-47.
12. Install the Battery Tray Cover and tighten the two screws. Refer to
Figure 3-64 Connecting Battery Cables on page
13. Slide the Battery Trays into the CHS LARGE BATT BOX.
14. Install the Battery Tray Suppressor while pulling the Battery
Connection Cable(s) through the cutouts provided. Refer to
3-65 Connecting Battery Cables on page 3-48.
screws.
15. Plug the Battery Connection Cable(s) into the Fuse Unit. Refer to
Figure 3-65 Connecting Battery Cables on page 3-48.
http//vietpro.com.vn
Figure 3-64 Connecting
Refer to Figure 3-62
Figure
3-47.
Figure
Secure with two
3-47