NEC Univerge SV8100 System Hardware Manual page 22

UNIVERGE SV8100

Powerful CPU Blade with Built-in Functionalities
The CPU blade of SV8100 is a heart of pure IP connections and TDM-based
connections. The CPU blade employs a 32 bit microprocessor. With this processing
power and DSP technology, it integrates the following functions on one board.
Some of these functions are managed with software licenses.
 DTMF receivers
 Caller ID receivers
 Caller ID senders
 MF senders / receivers
 10/100 Ethernet Port
 2 Control Relays
 MOH Input Port
 Paging Output Port
 In-Mail (VMDB)
 VoIP
In addition, by means of advanced LSI technology, size of the CPU blade is
minimized, O&M NIC port (10/100M) is built in and VoIPDB which has VoIP NIC
port (Gigabit Ethernet) is mountable without additional slots in the chassis. The
O&M NIC port is linked with LAN/WAN for inter-work with PCPro, SMDR, OAI
server, and the VoIP NIC port is linked with LAN/WAN for control signaling and
voice signaling (RTP) for DT700 series.

High Density Legacy Line/Trunk Blades
Major legacy line/trunk blades used in SV8100 are provided with blade + daughter
board architecture. When the blade is mounted only in an initial supply, line/trunk
interfaces can be easily expanded by adding the daughter board. The maximum
number of ports for the line/trunk blades is 8/16 ports with daughter blade,
respectively. This allows the physical system size to be compact.
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC http//vietpro.com.vn
1-3