NEC Univerge SV8100 System Hardware Manual page 73

2.3 Stand Mounting the 19" Chassis
A single or multiple chassis can be stand mounted. Controlling and Expansion
chassis can be stand mounted using the CHS2U STAND KIT (K) and CHS2U
STAND KIT (EXT).
2.3.1
3-14
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
3. Connect the ground wire to all chassis. Refer to
Chassis Grounding on page 3-33
the system.
4. Refer to 2.5 Installing the 19" Chassis on page 3-21
installation of the chassis or, Chapter 4 paragraph
Extension or Trunk Blade on page 4-4
CHS2U Chassis Installation
1. Using the supplied screws, assemble the CHS2U STAND KIT (K) and
CHS2U STAND KIT (EXT) (refer to
Mount with Screws).
Figure 3-16 Assemble Stand Mount with Screws
2. Secure the CHS2U chassis to the assembled CHS2U STAND KIT
refer to Figure 3-17 Secure CHS2U Chassis to CHS2U STAND KIT
with Screws on page 3-15.
http//vietpro.com.vn
UNIVERGE SV8100
2.5.5 Install 19"
for complete details on grounding
2.2 Installing an
for installation of blades.
Figure 3-16 Assemble Stand
Installing the SV8100 Chassis
to continue