NEC Univerge SV8100 System Hardware Manual page 374

UNIVERGE SV8100
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
10. Gently press the serial cable into the grooved cutout for the cable.
Figure 6-39 Grooved Cutout for Serial Cable
11. Connect the serial connection cord (refer to
Unit to the Multiline Terminal on page
the terminal body.
12. Open the DIP Switch Cover (refer to
Connections on page
to the required position. Close the cover.
13. If using the handset, place the stopper in the tilt leg.
Figure 6-40 Insert Stopper for Handset Use
6-46) from the PSA-L UNIT to
Figure 6-34 PSA-L UNIT
6-44). Set the DIP Switch on the PSA-L adapter
http//vietpro.com.vn
Figure 6-38 Attach PSA-L
6-47