NEC Univerge SV8100 System Hardware Manual page 258

UNIVERGE SV8100
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
5. Press 2 for Key Kit Type.
6. Press the UP/Down key to select the keypad kit..
Table 5-7 Ten-Key Kit Type
Ten-Key Kit Entry
Kit1
Kit2
Kit3
Kit4
Kit8
Kit9
Kit10
Kit11
Kit12
7. Press Soft Key 4 for "Next"
8. Press the Up/Down key to select the Line Key kit.
By default, the correct line key kit for the keypad kit selected
above is highlighted.
Table 5-8 Line Key Kit Type
Line Kit Entry
Kit12
Kit24
Kit32
Kit8
Kit6
Kit2
Kit0
9. Press Soft Key 4 for OK to complete.
10. Continue pressing Soft Key 4 to exit (Exit-Exit-Save). The terminal
will reset automatically.
Description
Type A Japan with cursor key
Type A .US with cursor key
Type B. US with cursor key
32 Line Key without cursor key
Type A. Japan without cursor key
Type A. US without cursor key
Type B. US without cursor key
Description
Enhanced 12-Button
Enhanced 24-Button
Enhanced 32-Button
DESI-Less
Value 6-Button
Value 2-Button
IP-CTS
http//vietpro.com.vn
5-33