NEC Univerge SV8100 System Hardware Manual page 365

10.3.3
6-38
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
ADA-L UNIT Connection
The mini-plug connection cord should not use an
attenuator and have a monaural (single ring) mini-plug
connection for normal recording.
10.3.3.1 ADA-L UNIT Connection for Recording Only
1. Set the ADA-L UNIT DSW switches (Refer to
ADA-L UNIT on page
2. Using the mini-plug connection cord, connect the ADA-L
Unit Out jack to the cassette recorder MIC jack (Refer to
Figure 6-27 ADA-L OUT Jack
Figure 6-27 ADA-L OUT Jack Connection
6-34).

Set DSW 6 to ON.

DSW switch 5 is used to change the
output level from thet OUT jack of
the ADA-L UNIT (On = Low, Off =
High).
Connection).
Installing SV8100 Optional Equipment
http//vietpro.com.vn
UNIVERGE SV8100
Figure 6-23