NEC Univerge SV8100 System Hardware Manual page 62

UNIVERGE SV8100
2.1.1
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
CHS2U Chassis Wall Mount Installation
1. Use the template shown in
Chassis) for required spacing before drilling.

Plywood should first be installed on the wall where the
chassis will be positioned. This allows secure
anchoring of the screws which support the weight of
the chassis.

Due to chassis weight, NEC recommends only a single
CHS2U chassis per wall mount.
Figure 3-3 Wall Mount Spacing Guide (19" Chassis)
2. Mark and drill the six holes required for a wall installation.
3. Align screw holes in wall mount brackets with drilled holes.
Figure 3-3 Wall Mount Spacing Guide (19"
http//vietpro.com.vn
3-3