NEC Univerge SV8100 System Hardware Manual page 303

5-78
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
1. Attach the DSS WM-L UNIT to the wall using six screws
or, using two wall mounted screws (refer to
Attach DSS WM-L UNIT Using
Figure 5-97 Attach DSS WM-L UNIT Using Screws
5.2.8.2 Mount DCL-60-1 CONSOLE on Wall Plate using DSS
WM-L UNIT
1. Locate the screw holes on the base and hang the cover
over the screws on the wall plate as illustrated in
5-98 Attach DSS WM-L UNIT to Wall
Figure 5-98 Attach DSS WM-L UNIT to Wall Plate
 Because of variation in wall plates, this method is not
recommended.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
http//vietpro.com.vn
UNIVERGE SV8100
Figure 5-97
Screws).
Figure
Plate.