NEC Univerge SV8100 System Hardware Manual page 257

5-32
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
4.5.2 Configuring the Digital Telephone for the Correct Number of
Line Keys
1. With the telephone not plugged in and the handset on-hook, press
the 4 and 6 buttons on the numbered keypad and connect the
telephone cable.
This places the telephone into Service Class R/W mode. The Message
Waiting (MW) LED should be lit.
2. Press 1 to enter the Line Key Type mode.
The Message Waiting(MW) LED should flash.
3. Follow the directions below for the type of line key module
installed:
Line Key Type
2-Button
6-Button
8-Button
12-Button
24-Button
4. Save to memory by pressing line key 2, 8, 14 or 20. The display
changes back to the Service Class R/W mode and the Message
Waiting (MW) LED is on Red.
5. Press Exit to return the telephone to the idle condition.
4.5.3 Configuring the IP Telephone for the Correct Number of Line
Keys
1. Press HOLD, TRANSFER, *, # to enter the terminal program
mode.
2. At the Login screen, enter the user name (default = ADMIN) and
password (default = 6633222) and press the OK Soft Key.
3. Press 3 for "Maintenance Setting".
4. Press 4 for "Adjust".
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Table 5-6 Line Key Type
http//vietpro.com.vn
UNIVERGE SV8100
Push
1
2
3
4
5