NEC Univerge SV8100 System Hardware Manual page 268

UNIVERGE SV8100
4.9 Adjusting the Height on the Multiline Terminal
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Line Key Kit Entry
Kit6
Kit2
Kit0
9. Press Soft Key 4 for OK to complete.
10. Continue pressing Soft Key 4 to exit (Exit-Exit-Save). The
terminal will reset automatically.
The height of the DT300/DT700 Series Multiline terminals can be adjusted by
moving the legs attached to the bottom of the terminal.
1. Turn telephone over (button side down).
2. Adjust legs to desired height (refer to
DT300/DT700 Series
Figure 5-42 Adjust Height of DT300/DT700 Series Terminal
3. Turn telephone over (button side up).
Table 5-11 Line Key Kit Type (Continued)
Value 6-Button
Value 2-Button
IP-CTS
Figure 5-42 Adjust Height of
Terminal).
http//vietpro.com.vn
Description
5-43