NEC Univerge SV8100 System Hardware Manual page 114

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
SECTION 4 REMOVE AND INSTALL COOLING FAN
If required, the cooling fan installed in the CHS2U chassis can be removed and
replaced. The following provides the procedure for the CHS2U chassis.
4.1
CHS2U Chassis
4.1.1
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Remove Cooling Fan
To reduce the possibility of electrical shock or damage to
equipment, NEC recommends powering off the chassis and
disconnecting the AC cable from the power source before
removing the chassis cover.
1.
Ensure the chassis is powered down.
To reduce the possibility of damage to equipment, the
installer must wear a grounded wrist strap to protect the
equipment from static electricity.
2.
Loosen retaining screw from chassis access panel.
Figure 3-78 Install the Fan Access Panel
http//vietpro.com.vn
Retaining Screw
3-55

Advertisement

Table of Contents
loading

Table of Contents