NEC Univerge SV8100 System Hardware Manual page 269

4.10 Removing or Installing the Tilt Legs on the Multiline Terminal
5-44
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
The Tilt Legs can be removed or installed on the DT300/DT700 Series
multiline terminal.
4.10.1 Remove Tilt Legs
1. Place the telephone on a flat surface (button side down).
2. Separate the Tilt Legs and place them flat against the telephone.
See Figure 5-43 Separating the Tilt
3. Push downward (two arrows) and slide downward (refer to
Figure 5-44 Attach Tilt Legs to DT300/DT700 Series
Figure 5-44 Attach Tilt Legs to DT300/DT700 Series Terminal
4. Lift and remove the Tilt Legs.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Legs.
Figure 5-43 Separating the Tilt Legs
http//vietpro.com.vn
UNIVERGE SV8100
Terminal).