C Onnectors - NEC Univerge SV8100 System Hardware Manual

LED Indication
Live LED
(Green)
On
Flash (1s)
Flash
(100ms)
Off
4.1.4
4-38
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Table 4-19 CD-8DLCA/CD-16DLCA LED Indications
Busy LED
(Red)
On
The assignment of the unit is
On
refused
Trouble found during self-
Flash (1s)
diagnostics
On
Normal
Operation
Off
On
Unit Busy
Off
Flash 800ms
Downloading firmware
(On/Off) x3 /
400ms Off
Connectors
The CNx01 connectors provide connection to four digital station ports.
With the CD-16DLCA blade, the CN101, CN201, CN301, and CN401
connectors are available. With the CD-8DLCA blade the CN301 and
CN401connectors are removed from the blade.
Any cabling to the DLCA blade must be within the
building - no outside cabling is permitted.
Table 4-20 CD-8DLCA/CD-16DLCA/ RJ-61 Cable Connector Pin-Outs on
page 4-38 show the pin-outs for the RJ-61 connector. Refer to
CD-8DLCA Blade on page 4-35
page 4-36 for the location of the connectors on the DCLA blades.
Operation Status
System Initializing
A Channel is busy
(use another from
CH1 ~ CHx)
All Channels are
idle
A Channel is busy
(use another from
CH1 ~ CHx)
All Channels are
idle
and Figure 4-13 CD-16DLCA Blade on
http//vietpro.com.vn
UNIVERGE SV8100
Remarks
-
When you exceed the
system capacity.
When the main software
version is not matched.
-
-
-
-
-
-
Installing the SV8100 Blades
Figure 4-12