NEC Univerge SV8100 System Hardware Manual page 60

UNIVERGE SV8100
Chapter3; Installing the SV8100 Chassis
SECTION 1 GENERAL INFORMATION
This chapter contains information to help the technician install the chassis for the
SV8100 system. The technician should be familiar with this section before
installing any equipment.
SECTION 2 INSTALLING THE CHASSIS
The CHS2U chassis has six universal blade slots for legacy line/trunk blade (Single
Line Telephone Interface, Digital Multiline Terminal Interface, Central Office Trunk,
ISDN PRI Interface, etc.), In-skin Application Blades (In-skin UMS, In-Skin Router,
etc.). It also houses the BUS Interface Blade, Power Supply Unit (PSU) and
Cooling FAN.
When the CD-CP00 blade is installed in the first 19" chassis, it is referred to as the
controlling chassis. Additional chassis, referred to as expansion chassis, can be
installed to increase the capacity of the system to meet the customer's business
needs. Each chassis (Expansion or Controlling), is powered by a MPS7101 power
supply.
The chassis can be wall mounted, floor mounted, stand mounted or rack mounted.
The first part of this chapter describes the differing types of mounting options and
the rest of this section describes how to install the chassis.
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC http//vietpro.com.vn
3-1