NEC Univerge SV8100 System Hardware Manual page 110

UNIVERGE SV8100
3.2.4
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
6. Insert the access panel tab into the rear of the CHS2U chassis running
the Battery Connection Cable through the cutout. Secure panel with
the retaining screw. Refer to
Figure 3-71 Install the Fan Access Panel
7. Connect grounding and AC power cables.
8. Apply power to chassis.
CHS LARGE BATT BOX Fuse Replacement
1. Loosen screw on front of CHS LARGE BATT BOX. Refer to
3-72 Removing CHS LARGE BATT BOX Cover.
Figure 3-72 Removing CHS LARDGE BATT Cover
Figure 3-71 Install the Fan Access Panel.
http//vietpro.com.vn
Figure
3-51