NEC Univerge SV8100 System Hardware Manual page 250

UNIVERGE SV8100
4.3 Connecting the IP Multiline Terminal to the Network and PC
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
These instructions for connecting an IP multiline terminal to the Network and
PC apply to DT700 multiline terminals. Refer to
Connector Locations.
1. Connect the LAN Network 10Base-T/100Base-TX cable to the LAN (=)
connector.
2. The IP terminal has a switching HUB to connect a PC to the LAN Network.
Connect the 10 Base-T/100 Base-TX straight cable used for this
connection to the PC(x) connector and to the PC.
Refer to Figure 5-20 Typical Network IP Connection on page
Figure 5-19 IP Terminal Connector Locations
http//vietpro.com.vn
Figure 5-19 IP Terminal
5-26.
5-25