Approved Channels; Finding The Ip Address On Networks With A Dhcp Server(Fit Ap); Log Into The Ap - H3C WA2612-AGN Installation Manual

Approved Channels

Use of this product is only authorized for the channels approved by each country. For
proper installation, select your country from the country-selection list.
To conform to FCC and other country restrictions, your product may be limited in the
channels that are available. If other channels are permitted your country, please visit
the web site for the latest software version. The Appendix B list the Software
Downloads information.

Finding the IP Address on Networks with a DHCP Server(FIT AP)

If your network has a DHCP server, it automatically assigns an IP address to the AP.

Log into the AP

To Log into the AP after you determine its IP address, follows these steps:
1) Connect the AP and PC, and ensure that the PC and AP can communicate
with each other properly.
2) Launch your PC's web browser. In the address bar, enter your AP's IP
address and press Enter.
3) At the AP Login Screen, type the user name and password, and the
verification code, select the language (English and Chinese are supported at
present), and click Login. The default username and password are
case-sensitive:
Username: admin
Password: password
10