2Factory Configuration; Multiple Analog Output Blocks; 1Configure The Mao Blocks - Emerson Rosemount 2230 Reference Manual

Reference Manual
00809-0100-2230, Rev CA
4.10.2 Factory configuration
The following fixed configuration of function blocks is provided:
Table 4-5. Available function blocks for the Rosemount 2230
Function Block
Multiple Analog Output
Multiple Analog Output
Multiple Analog Output
Multiple Analog Output
4.11

Multiple Analog Output blocks

To show input data from MAO blocks on the display, the Rosemount 2230 needs to be configured by
using F
transducer block" on page
4.11.1 Configure the MAO blocks
A MAO Block is used for receiving measurement data from devices such as the Rosemount 5900S Radar
Level Gauge. The Rosemount 2230 is supplied with four pre-configured MAO blocks according to
4-5 on page
Note that the CHANNEL parameter value has to be equal to 1 (auto) in order to provide data output from
the MAO block.
An example of a setup with a Rosemount 2230 receiving data from a Rosemount 5900S and a
Rosemount 2240S is shown in
Configuration and Operation
Index
1400
1500
1600
1700
fieldbus parameters which are available in the Display Transducer Block (see
OUNDATION
133).
59. Each MAO block has eight inputs.
Figure 4-11 on page
Configuration and Operation
Default Tag Available
MAO_1400 Permanent
MAO_1500 Permanent
MAO_1600 Permanent
MAO_1700 Permanent
60.
July 2017
"Display
Table
59