Table of Contents
Advertisement
Configuration and Operation
July 2017
5. Select the Configure>Manual Setup option.
Manual Setup
Configure
6. Set the device to Out Of Service (OOS) mode by clicking the Change button.
7. Select the desired tab (Device, Multiple Analog Output Block Mapping, Tank Name etc.) and configure
the device.
8. The Device tab lets you configure display units, display view and language. It also provides the option
to write protect the Rosemount 2230 (see
9. In addition to the Device tab there are various tabs that give you access to options such as block
parameter mapping, configuration of custom parameters and units, as well as tank name
specification as shown below.
10.When configuration is finished, click the Send button to store the current configuration in the device
database.
11.Press the Change button to set the device back to operating (Auto) mode.
12.Press the Close button to close the window.
76
"Write protection" on page
Change Mode
Reference Manual
00809-0100-2230, Rev CA
107).
Configuration and Operation
Advertisement
Table of Contents
