Table of Contents
Advertisement
Reference Manual
00809-0100-2230, Rev CA
Index
Number
79
FAILED_ALM
80
MAINT_ALM
81
ADVISE_ALM
82
FAILED_ENABLE
83
FAILED_MASK
84
FAILED_ACTIVE
85
MAINT_PRI
86
MAINT_ENABLE
87
MAINT_MASK
88
MAINT_ACTIVE
89
ADVISE_PRI
90
ADVISE_ENABLE
91
ADVISE_MASK
92
ADVISE_ACTIVE
Table C-2.
1
Diagnostic Simulate
Value
2
Diagnostic Value
3
Enable
™
F
Fieldbus Block Information
OUNDATION
Parameter
Description
Alarm indicating a failure within a device which makes the device non-operational.
Alarm indicating the device needs maintenance soon. If the condition is ignored,
the device will eventually fail.
Alarm indicating advisory alarms. These conditions do not have a direct impact on
the process or device integrity.
Enabled FAILED_ALM alarm conditions. Corresponds bit for bit to the
FAILED_ACTIVE. A bit on means that the corresponding alarm condition is enabled
and will be detected. A bit off means the corresponding alarm condition is disabled
and will not be detected.
This parameter is the Read Only copy of FD_FAIL_MAP.
Mask of FAILED_ALM. Corresponds bit of bit to FAILED_ACTIVE. A bit on means that
the condition is masked out from alarming.
This parameter is the Read Only copy of FD_FAIL_MASK.
Enumerated list of failure conditions within a device. All open bits are free to be
used as appropriate for each specific device.
This parameter is the Read Only copy of FD_FAIL_ACTIVE.
Designates the alarming priority of the MAINT_ALM
Enabled MAINT_ALM alarm conditions. Corresponds bit for bit to the
MAINT_ACTIVE. A bit on means that the corresponding alarm condition is enabled
and will be detected. A bit off means the corresponding alarm condition is disabled
and will not be detected.
This parameter is the Read Only copy of FD_OFFSPEC_MAP
Mask of MAINT_ALM. Corresponds bit of bit to MAINT_ACTIVE. A bit on means that
the condition is masked out from alarming.
This parameter is the Read Only copy of FD_OFFSPEC_MASK.
Enumerated list of maintenance conditions within a device.
This parameter is the Read Only copy of FD_OFFSPEC_ACTIVE.
Designates the alarming priority of the ADVISE_ALM
Enabled ADVISE_ALM alarm conditions. Corresponds bit for bit to the
ADVISE_ACTIVE. A bit on means that the corresponding alarm condition is enabled
and will be detected. A bit off means the corresponding alarm condition is disabled
and will not be detected.
This parameter is the Read Only copy of FD_MAINT_MASK & FD_CHECK_MASK.
Mask of ADVISE_ALM. Corresponds bit by bit to ADVISE_ACTIVE. A bit on means
that the condition is masked out from alarming. This parameter is the Read Only
copy of FD_MAINT_MASK & FD_CHECK_MASK.
Enumerated list of advisory conditions within a device. All open bits are free to be
used as appropriate for each specific device.
This parameter is the Read Only copy of FD_MAINT_ACTIVE & FD_CHECK_ACTIVE.
FD_SIMULATE elements
Bit string
Bit string
Unsigned 8
™
F
OUNDATION
4
Writable. Used for diagnostics when simulation is
enabled
4
Current diagnostics detected by the device.
1
Enable/Disable simulation. Dynamic, so simulation
will always be disabled after a device restart.
Fieldbus Block Information
July 2017
127
Advertisement
Table of Contents
