1Alert Default Settings - Emerson Rosemount 2230 Reference Manual

Configuration and Operation
July 2017
4.15.1 Alert default settings
The following default settings are used for the FF I/O Board and the Rosemount 2230 Graphical Field
Display. You may configure error types in a different way if you like. For example, the Internal Temperature
Out of Limits error is configured as a Out of Specification alert for the Rosemount 2230 by default. The Alert
Setup window allows you to enable the alert as Failed or Function Check instead.
FF I/O Board
Table 4-8. Default Alert configuration for FF I/O Board
Error type
Check Function
MAO Fault State Mode Enabled
Memory Failure FF I/O Board
Internal communication failure
Electronics failure FF I/O Board
Rosemount 2230 Graphical Field Display
Table 4-9. Default Alert configuration for Rosemount 2230
Error type
Internal Temperature Out of Limits
Invalid Model Code
Software failure
Database error
Electronics failure Main Board
80
Default configuration
Function Check
Out of Specification alert
Failed alert
Failed alert
Failed alert
Default configuration
Out of Specification alert
Out of Specification alert
Failed alert
Failed alert
Failed alert
Reference Manual
00809-0100-2230, Rev CA
Enabled / Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled / Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Configuration and Operation