Product Recycling/Disposal; Packing Material; Reuse And Recycling; Energy Recovery - Emerson Rosemount 2230 Reference Manual

Graphical field display
Hide thumbs Also See for Rosemount 2230:
Table of Contents

Advertisement

Reference Manual
00809-0100-2230, Rev CA
1.5

Product recycling/disposal

Recycling of equipment and packaging should be taken into consideration and disposed of in accordance
with local and national legislation/regulations.
Recycling or disposal should be done following instructions for correct separation of materials when
breaking up the units.
1.6

Packing material

Rosemount Tank Radar AB is fully certified according to ISO 14001 environmental standards. By recycling
the corrugated paperboard, or wooden boxes, used for shipping our products you can contribute to take
care of the environment.
1.6.1

Reuse and recycling

Experience has shown that wooden boxes can be used several times for various purposes. After careful
disassembly the wooden parts may be reused. Metal waste may be converted.
1.6.2

Energy recovery

Products which have served their time may be divided into wood and metal components and the wood
can be used as fuel in sufficient ovens.
Due to its low moisture content (approximately 7%) this fuel has a higher calorific value than ordinary
wood fuel (moisture content approximately 20%).
When burning interior plywood the nitrogen in the adhesives may increase emissions of nitrogen oxides
to the air 3-4 times more than when burning bark and splinter.
Note
Landfill is not a recycling option and should be avoided.
Introduction
Introduction
July 2017
5

Advertisement

Table of Contents
loading

Table of Contents