Figure 5-5 - Detailed Data Point Information
Figure 5-6 - Detailed Information if the Data Point Failed
Figure 5-7 - Detailed Information if Data Point is in Override
If no data point is selected when the details icon is
touched, a reminder will appear:
10 • FSD Installation and Operation Guide
Figure 5-8 - Select A Data Point Reminder Screen
If a pointer has not been defined in the E2 application,
a three-dash result will appear. If this three-dash
(- - -) value is selected and the details icon
touched, the following message will appear:
Figure 5-9 - No Pointer Is Defined Message
5.4. FSD Configuration
Configuration Screen
The Configuration screen has four tabs that are used
to configure the FSD. When the tool icon is touched,
the security login screen appears:
is
026-1400 Rev 2 12-APR-10