Table of Contents
Advertisement
Configuration and Operation
July 2017
Table 4-1. Selectable variables
Variable
Level
Ullage
Level Rate
Signal Strength
Free Water Level
Vapor Pressure
Liquid Pressure
Air Pressure
Ambient Temperature
Vapor Temperature
Liquid Average
Temperature
Tank Temperature
Temperature 1 To 16
Observed Density
Reference Density
Flow rate
Tot Obs Volume
User defined 1 t o5
Middle Pressure
Tank Height
Level
Custom TMV 1-10
Level %
Ullage %
Select variables
Variables to present in the View Mode can also be configured by using the TankMaster WinSetup
configuration program, a 475 Field Communicator, the AMS Device Manager or other host system. For
more information see the Rosemount Tank Gauging System Configuration Manual (Document
no. 00809-0300-5100).
46
Description
Product level in the displayed tank
Ullage is the distance from the Tank Reference Point to the product surface
How the product in the tank moves when emptying or filling the tank
The signal strength of the radar level gauge.
The level of water in the bottom of the tank. Available when a water level sensor is
connected to the tank
Measured vapor pressure
Measured liquid pressure
Measured air pressure in the tank
Air temperature outside the tank
Temperature of vapor inside the tank
Averagte temperature of the product in the tank
Average temperature of the product and vapor in the tank
Individual temperature of each selected temperature spot element.
Calculated density based on the product level and pressure
Reference density as specified with the configuration tool
Measured flow rate
Total observed product volume in the tank.
Custom measurement variable
Measured pressure from transmitter P2
Tank Reference Height
Difference between two product levels
Custom tank variables
Product level presented in a bargraph
Ullage value presented in a bargraph
Reference Manual
00809-0100-2230, Rev CA
Configuration and Operation
Advertisement
Table of Contents
