Configuration and Operation
July 2017
4.6.4
Toggle time
The Toggle Time parameter specifies the time period that each value, or set of values, is presented on the
display.
To set the Toggle Time:
1. From View Mode, press <Menu> <Options> <Toggle Time>:
2. Use the up and down arrow softkeys to increase or decrease the Toggle Time.
3. Press the OK softkey to select the desired value and return to View Mode.
4.6.5
Language
To set the display Language:
1. Use the up and down arrow softkeys and navigate to the preferred language option:
2. Press the OK softkey to select the language and return to View Mode.
50
Reference Manual
00809-0100-2230, Rev CA
Configuration and Operation