Table of Contents
Advertisement
Reference Manual
00809-0100-2230, Rev CA
5.7.5
Reset/Restore
The Service Tools/Maintenance option lets you restart the Rosemount 2230 Display if needed. You may
also reset the display to factory configuration:
1. In AMS Device Manager open Service Tools as shown in
2. In the Navigation Pane select the Maintenance option.
Maintenance
3. Select the Reset/Restore tab.
4. Click the desired button. You may choose between the following options:
Restart communication - restarts the Foundation fieldbus communication.
Factory Reset - Device Configuration. This option will reset the device specific configuration to the
factory settings.
Factory Reset - FF I/O Board. This option will reset the Foundation fieldbus communication board to
the factory configuration.
5. Click the Send button to close the window when finished.
Service and Troubleshooting
Service and Troubleshooting
"Service Tools window" on page
July 2017
100.
105
Advertisement
Table of Contents
