Table of Contents
Advertisement
Configuration and Operation
July 2017
4.6.3
Units for display
In the Units for Display menu, you can see which measurement units that are used for the displayed
variables. The available measurement units are listed in
To change measurement unit:
1. In View Mode, press <Menu> <Options> <Units for Display>:
2. Use the up and down arrow softkeys to navigate to the desired variable menu item. In the example
above, the Length variable was chosen.
3. Press the
4. Use the up and down arrow softkeys to navigate to the desired measurement unit.
5. Press the OK softkey to select the unit and return to Units for Display.
See
Table 4-2
48
softkey to continue to the list of options for the selected variable.
for a list of available measurement units.
00809-0100-2230, Rev CA
Table 4-2 on page
49.
Reference Manual
Configuration and Operation
Advertisement
Table of Contents
