Table of Contents
Advertisement
Installation
July 2017
Pipe mounting
The Rosemount 2230 Graphical Field Display can be mounted on pipes ranging from a diameter of 33
mm to 60 mm by using an optional mounting kit supplied by Emerson Automation Solutions/Rose-
mount Tank Gauging.
Bracket
22
Locking screw
Bracket
1. Attach the bracket to the pipe.
2. Ensure that the Rosemount 2230 is placed
4 nuts and
in a direction so that the display is clearly
washers
visible and wiring can be properly
connected.
3. Tighten the nuts. Use moderate torque to
ensure that the bracket does not break.
4. Attach the display to the bracket by sliding
it from the top downwards.
5. Secure the display to the bracket by
tightening the locking screw.
Reference Manual
00809-0100-2230, Rev CA
Installation
Advertisement
Table of Contents
