Table of Contents
Advertisement
Service and Troubleshooting
July 2017
5. Select one of the tabs, Holding Registers or Input Registers, depending on what type of register you are
interested in.
6. Type a start value in the Start Holding/Input Register field, and click the Send button to view the
current register values.
Warning
Writing to Holding registers may cause the device to change behavior. Make sure systems and people
relying on data from the device are made aware of the changed conditions due to this action. Failure to
do so could result in death, serious injury and/or property damage.
104
Reference Manual
00809-0100-2230, Rev CA
Service and Troubleshooting
Advertisement
Table of Contents
