Table of Contents
Advertisement
Reference Manual
00809-0100-2230, Rev CA
5. Select the Configure>Alert Setup option as shown below.
Alert Setup
Configure
6. Select the desired tab (FF I/O Board or Rosemount 2230 Graphical Field Display).
7. Configure alerts for the different error types.
8. You may change the configuration for each error type by selecting the appropriate check box to
match your requirements. Note that it is possible to map an error condition to several alert categories
if desired.
9. See
(Failure, Maintenance, Out of Specification, and Function Check).
10.Note that when simulating alerts, only alerts which are setup according to the default configuration
will be simulated, see section
11.Once the configuration is finished, click the Send button to save the current alert setup.
Configuration and Operation
"Alert default settings" on page 80
for information on the default setup for error types and alerts
"Alert default settings" on page
Configuration and Operation
80.
July 2017
79
Advertisement
Table of Contents
