Table of Contents
Advertisement
PACSystems™ RXi Industrial Displays User Manual
GFK-3138E
2.4
Configuration and Setup RXi Industrial Monitor
2.4.1
On-Screen Display (OSD)
AD Board OSD Functions
Figure 4: AD Board OSD Functions Legend
Auto-Adjust
Power switch: To turn ON or OFF the power
Shift the icon to the left side or shift it up
Shift the icon to the right side or shift it down
Menu: To enter the OSD menu for related icon and item
Auto Button: One-touch auto adjustment
Enter Burn-in Mode
Before entering the burn-in mode, first, disconnect the AC power cord, then press and hold
the
on the top left corner of your screen. Now it can be put into the burn-in mode for changing
colors.
Exit Burn-in Mode
Before exiting burn-in mode, please first disconnect the AC power cord, then press the
button (If for any reason this button is non-functional, press and hold the
AC power cord is connected. Do not release the button until the AC power cord is connected
again and the wording of RGB appears on the top left corner of your screen, then wait for 3
seconds. If there is no input plugged into the unit, the CABLE NOT CONNECTED message will
denote that it has successfully left burn-in mode.
RXi – Industrial Monitor Overview
Up/Left Down/Right Power
Menu/Entry
Power Indicator
buttons, then release after the AC power cord is connected and the RGB appears
Section 2
Nov 2022
button) until the
6
Advertisement
Table of Contents
