Table of Contents
Advertisement
Service and Troubleshooting
July 2017
5.7.6
Simulation
The Service Tools/Maintenance option lets you simulate Field Diagnostics alerts.
To start simulation:
1. Ensure that the Simulation switch is set to "ON" (see
2. In AMS Device Manager open Service Tools as shown in
3. In the Navigation Pane select the Simulate option.
Simulate
4. Check the error conditions that you wish to simulate.
5. Click the Enable/Disable Alerts Simulation button to enable simulation of alerts.
6. Click the Send button to start simulation.
5.7.7
Active Alerts
See
"Viewing active alerts in AMS Device Manager" on page
106
00809-0100-2230, Rev CA
"Write protection" on page
"Service Tools window" on page
97.
Reference Manual
107).
100.
Service and Troubleshooting
Advertisement
Table of Contents
