Table 3-1 Combination Of Sensor Type And Correction Applied To Current Measurement - Agilent Technologies E4418B User Manual

Power meter
Hide thumbs Also See for E4418B:
Table of Contents

Advertisement

The softkey menu structured to this key affects the channel setup.
Press this key to access the "Frequency/Cal Fac" menu which allows you to
enter the frequency of the signal to be measured or the calibration factor.
Depending on the type of power sensor connected and whether or not a sensor
calibration table or frequency dependent offset table is selected, the text on
some softkeys may appear grayed out. This indicates that they are not relevant
in the power meter's current mode of operation.
relevant softkeys in various modes of operation.

Table 3-1 Combination of Sensor Type and Correction Applied to Current Measurement

Sensor Model
Agilent 8480 Series
power sensors
Agilent E-Series
power sensors
Agilent N8480 Series
power sensors
(excluding Option
CFT)
Agilent N8480 Series
power sensors with
Option CFT
E4418B Power Meter User's Guide
Sensor Calibration Table Selected
Frequency
Freq
Frequency can be
entered. Default value
is 50 MHz.
Not Applicable
Not Applicable
Frequency can be
entered. Default value
is 50 MHz.
Sensor Calibration Table Not Selected
Cal Factor
Cal Fac
The Cal Factor is
obtained from the
sensor calibration
table but can be
overridden by this
softkey.
Not Applicable
Not Applicable
The Cal Factor is
obtained from the
sensor calibration
table but can be
overridden by this
softkey.
Menu Reference
Table 3- 1
Frequency
Cal Factor
Freq
Cal Fac
Frequency can be
The Cal Factor can be
entered if a
entered. Default
frequency
value is 100%.
dependent offset
table is selected.
Frequency can be
The Cal Factor
entered. Default
cannot be entered, it
value is 50 MHz.
is obtained from the
EEPROM in the
power sensor.
Frequency can be
The Cal Factor
entered. Default
cannot be entered, it
value is 50 MHz.
is obtained from the
EEPROM in the
power sensor.
Frequency can be
The Cal Factor can be
entered if a
entered. Default
frequency
value is 100%.
dependent offset
table is selected.
3
details the
121

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents