Agilent Technologies E4418B User Manual page 64

2 Power Meter Operation
8 To confirm your choice, press the appropriate frequency units.
9 Connect the power sensor to the signal to be measured.
10 The measurement result is now displayed.
Example
To make a measurement using an Agilent E- Series power sensor. The
frequency of the signal to be measured is 100 MHz.
• Disconnect the power sensor from any source.
• Press
• Press
• Connect the power sensor to the POWER REF output.
• Press
• Press
• Connect the power sensor to the signal to be measured.
• The measurement result is now displayed.
40
• Use or
.
.
Zero
.
Cal
enter 100. Press
MHz
to move to other digits.
, . Use the
Freq
.
, , , and
E4418B Power Meter User's Guide
keys to