Table of Contents
Advertisement
Performing Current Measurement
Ensure the test leads are disconnected from the input
WA RN ING
terminals when measuring current with the clamp meter.
1 Set the rotary switch to ~A.
2 Press Shift to switch between AC current, DC current (for U1212A and
U1213A only), and AC+DC current (for U1213A only) measurements.
3 Press the handle to open the clamp jaw.
4 Clamp around a conductor and ensure that the conductor fits the
markings on the jaw.
5 Read the display. Press Hz to view the frequency indication on the
secondary display.
Quick Start Guide
Press
Conductor
Read
Advertisement
Table of Contents
