Agilent Technologies E4418B User Manual page 56

2 Power Meter Operation
There are a variety of methods to connect the power sensors to the power
meter depending on the model of power sensor you are using. Refer to
Table 2- 1
models.
1 Press
2 Verify the reference calibration factor of your power sensor with that
3 To confirm your choice, press
4 Connect the power sensor to the POWER REF output.
5 Press
Example
To calibrate the power meter with a power sensor whose reference calibration
factor is 99.8%.
• Press
• Press
• Connect the power sensor to the POWER REF output.
• Press
32
on page 33 for details on connecting different power sensor
.
displayed under
Ref CF
calibration table if one is selected, otherwise it is the last value set or the
default of 100%. If the value is not correct, press
displays the reference calibration factor in a pop- up window. Modify this
reference calibration factor (see below) as desired.
• Use or
positioned.
• Use or
to calibrate the power meter. During calibration, the wait symbol
Cal
is displayed. (The power meter automatically turns on the POWER REF
output.)
.
. Use the
Ref CF
.
%
.
Cal
. The value shown is obtained from the sensor
to modify the digit on which the cursor is currently
to move to other digits.
.
%
, , , and
. The power meter
Ref CF
keys to enter 99.8. Press
E4418B Power Meter User's Guide