Agilent Technologies E4418B User Manual page 28

1 Getting Started
2 Set the display contrast if required.
3 Connect a power sensor.
4 Making a measurement.
4
The display contrast is adjusted by pressing
softkeys are not displayed, press
Connect one end of the sensor cable to the power meter's channel input and
the other end to the power sensor.
A minimum warm- up time of 30 minutes is recommended before accurate
measurements can be made.
Prior to making your first measurement, you must zero and calibrate the
sensor and meter combination. Refer to
information if you are not familiar with zeroing, calibrating or making
measurements with a power meter.
and
repeatedly until they appear.
Chapter 2 for further
E4418B Power Meter User's Guide
. If these