Agilent Technologies E4418B User Manual page 188

5 Specifications
1 Within one hour after zero set, at a constant temperature, after a 24-hour warm-up of the power me-
2 The number of averages at 16 (for normal mode) and 32 (for x2 mode), at a constant temperature,
3 The zero drift and measurement noise specifications are tested at 50 MHz.
164
Power Sensor
Agilent N8487A (exclude Option
3
CFT)
Agilent N8488A (exclude Option
3
CFT)
Agilent N8481A with Option CFT
Agilent N8481B with Option CFT
Agilent N8481H with Option CFT
Agilent N8482A with Option CFT
Agilent N8482B with Option CFT
Agilent N8482H with Option CFT
Agilent N8485A with Option CFT
Agilent N8486AR with Option CFT
Agilent N8486AQ with Option CFT
Agilent N8487A with Option CFT
ter.
measured over a one minute interval and two standard deviations. For Agilent E-Series power sen-
sors, the measurement noise is measured within the low range. Refer to the relevant power sensor
manual for further information.
1
Zero Drift
<±3 nW
<±3 nW
3
<±7 nW
3
<±7 µW
3
<±0.7 µW
3
<±7 nW
3
<±7 µW
3
<±0.7 µW
3
<±7 nW
3
<±7 nW
3
<±7 nW
3
<±7 nW
Measurement Noise
<80 nW
<80 nW
<114 nW
<114 µW
<11.4 µW
<114 nW
<114 µW
<11.4 µW
<114 nW
<114 nW
<114 nW
<114 nW
E4418B Power Meter User's Guide
2