Agilent Technologies E4418B User Manual page 101

To select the format of the display in the currently selected window:
1 Press
2 Press
To select the range of the analog display in the currently selected window:
1 Press
2 The current setting of the maximum and minimum values displayed on
3 To change either of these settings, press the appropriate softkey. The
4 The choices available depend on the unit of measurement selected and
E4418B Power Meter User's Guide
,
Display Format
Meter Dgtl Anlg
Pressing this key toggles between a digital and analog display.
,
Display Format Anlg Mtr Scaling
the analog meter are displayed under the
respectively.
power meter displays the current value in a pop- up window. Modify
this value (see below) until the desired value is displayed.
• Use or
currently positioned.
• Use or
the current measurement mode. If the measurement unit selected is
logarithmic, then the choice will be
unit selected is linear, then choose the appropriate softkeys from the
following menus:
.
to highlight the type of format you require.
,
to modify the digit on which the cursor is
to move to other digits.
dB
%
Cancel
%
Increment
Multiplier
Decrement
Multiplier
Cancel
Power Meter Operation
.
and softkeys
Max Min
or . If the measurement
dBm
mW
μ
W
nW
Cancel
W
Increment
Multiplier
Decrement
Multiplier
Cancel
2
77